System with 1 motor unit ( TSI.25.002)
Silhouette target turning system complete with 5 target support structures with a centreline distance of 0.75 m. assembled on twin bearings. Rotation is controlled by a single motor unit/gear, connected to the five target support structures by a stainless steel rod. The structure of the frame, the motor casing and the bolting are made from stainless steel.
| TECHNICAL DATA |
| |
| Dimensions: |
|
3750x520x600 mm (LxPxH) |
|
| Weight: |
|
90 Kg |
|
| Power supply: |
|
380V 50/60 Hz |
|
| Installed horsepower: |
|
0,37 Kw |
|
| Full load current: |
|
1,3 A |
|
|
|
System with 1 motor unit ( TSI.25.002.2)
The system is composed of a single motor unit and has seven target support structures on the frame allowing you to use five targets with a centreline distance of 75 cm, or four targets with a centreline distance of 1.00 metre. This arrangement is very useful for PGC, PS and PSp competitions, allowing you to use four targets instead of just three.
The structure of the frame, the motor casing and the bolting are made from stainless steel.
| TECHNICAL DATA |
| |
| Dimensions: |
|
3750x520x600 mm (LxPxH) |
|
| Weight: |
|
90 Kg |
|
| Power supply: |
|
380V 50/60 Hz |
|
| Installed horsepower: |
|
0,37 Kw |
|
| Full load current: |
|
1,3 A |
|
|
|
|
|
|
